[vc_row][vc_column][vc_column_text]
Imagine a world without huge banks of secondary regulators mounted in a long line along a wall of your walk-in cooler, with gauges that can fail or get damaged and dials that at any time can be adjusted or re-set without your knowledge. The GovReg™ system is one that brings some peace of mind. Seamlessly insert your regulator right before your keg coupler, set at the perfect pressure that you want. Thread it on with a hex nut and let it do the rest! Here’s a look at some of the equipment to make it happen.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”51005″ img_size=”medium” alignment=”center”][vc_single_image image=”53743″ img_size=”medium”][vc_single_image image=”53744″ img_size=”medium”][/vc_column][vc_column width=”3/4″][vc_column_text]
Secondary Regulator
Must run in-line behind a primary regulator. Never connect directly to a CO2 tank. Made of durable stainless steel. Its patented technology accurately maintains desired pressure. Tamper-proof. Set it and forget it! Convenient design saves space. Attaches direct to 5/16″ gas line and standard threaded keg couplers without any adapter. No mounting on cooler wall, so no drilling necessary. Swift installation time saves effort and expense. High precision and lasting durability.
Starter Kit
Adjuster tool & 2 secondary regulators. Set your primary to higher pressure. Each secondary is preset to 12 p.s.i. Maximum inlet pressure 150 p.s.i.
Adjuster Tool
Adjuster tool with gauge comes with easy to read instructions. Have your primary set to higher pressure. Connect secondary regulator to open end and secure with standard hex nut. Adjust to desired pressure. 0-45 p.s.i.
Call the Draft Equipment Department at F.H. Steinbart Co. to discuss your application.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_row_inner][vc_column_inner][/vc_column_inner][/vc_row_inner]
[/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]
