Long Draw - Glycol Equipment

Glycol Rack, Power Pack, Aluminum

1 in stock

$462.00
Large 48″ Power Pack Glycol Rack, Aluminum with 2 shelves. The power pack is the heart of the beer system—it

Motor, 1/3 HP, Glycol Chiller 220V Micro Matic Pro-Line Power Packs

2 in stock

$449.99
Replacement Glycol Motor Power Pack for Micro Matic Glycol Power Packs modelMMPP4303, MMPP4305 and MMPP4307 units manufactured 2007–Current Type Power

Electric Motor 1/3 HP Marathon

2 in stock

$279.99
1/3 hp motor commonly used for hub-mounted pump applications, including liquid transfer pumps such as glycol chillers. (Also known as 

Procon Glycol Pump Series 2 | Brass

4 in stock

$149.45
Procon® Rotary Vane Fluid PumpAll pumps have a nominal speed of 1,725 RPM, a maximum discharge pressure of 250 PSI, clockwise

Procon Glycol Pump Series 3 | Stainless Steel

1 in stock

$163.70
Procon® Rotary Vane Fluid PumpAll pumps have a nominal speed of 1,725 RPM, a maximum discharge pressure of 250 PSI, clockwise

Procon Glycol Pump Series 5 | Stainless Steel

1 in stock

$225.00
Procon® Rotary Vane Fluid PumpAll pumps have a nominal speed of 1,725 RPM, a maximum discharge pressure of 250 PSI, clockwise

Pump Motor Coupling Nylon Center Key

14 in stock

$25.50
Replacement Procon Pump Key MM—3362—2 for PP4301—PPM Procon Pump Assembly. Used on Glycol Power Packs models PP4301, PP4302, PP4303, MMPP4301,

Pump Motor Coupling Set of Center Key, Gasket, and 1 Clamp

16 in stock

$29.49
Replacement pump to motor coupling for glycol chillers. Reduces wear between pump-motor shaftsReduces heat transfer from motor to pumpIncludes one

Pump Motor Coupling Set of Center Key, Gasket, and 2 Clamps

14 in stock

$40.95
Replacement pump to motor coupling for glycol chillers. Reduces wear between pump-motor shaftsReduces heat transfer from motor to pumpIncludes two

Clamp for Glycol Pump & Motor

82 in stock

$6.29
1 individual clamp. Also available as a set with gaskets and nylon center key.

Glycol Block Set, Straight Groove, Aluminum

62 in stock

$31.99
Use these aluminum cooling blocks for custom draft towers where glycol cooling is required. Fits standard tower shanks (7/8″).Has cutouts

Glycol Block Set, Return Groove, Aluminum

84 in stock

$32.99
Use these aluminum cooling blocks for custom draft towers where glycol cooling is required.  Fits standard tower shanks (7/8″).Has cutouts

Sponge Rubber Insulation | 6ft Length | Various Diameters

2 in stock

$17.70
Select from preferred ID below. Mildew and mold resistant - great for insulating soda and beer trunk lines. Sold in 6 ft lengths. 1/2" wall thickness.
7/8" ID

Air Duct Tubing | by the ft. | Various Diameters

51.5 in stock

$6.65
Select preferred diameter below.

Use 1 in. diameter air duct tubing for forced air systems.  I.e. to remote dispensing stations at various distances. Designed for 1-2 products, wrapped with tubular insulation, to run up inside column towers, shaft boxes etc.

Mounting Bracket | Air Duct Tubing | Various Sizes

3 in stock

$54.99
Select size required below.
Use to mount blower fan to walk cooler ceiling/ wall. 2 in. cylinder connects to 2 in. air duct tubing.

Tubing, Air Duct 4″ ID, by the Foot

20 in stock

$8.50
Select preferred diameter below.

Use 4 in. diameter air duct tubing for forced air systems. I.e.- to remote dispensing stations at various distances. Designed for 12-16 products, wrapped with tubular insulation, to run up inside column towers, shaft boxes etc.

Trunk Line 3/8″ ID Glycol Only 2 Lines (1ea In/out) by the foot

200 in stock

$12.99
Pre-wrapped glycol only trunkline. Ready to install, save labor time at the site. Ideal for running glycol lines from power

Trunkline, 1/4″ I.D. – 12 Products/4 Glycol Lines, Barriermaster Flavourlock

30 in stock

$31.99
Micro Matic has engineered the most technologically advanced trunkline and beverage tubing in the industry. The patented Barriermaster Flavourlock™ tubing

Tubing, Air Duct 2.5″ ID, by the Foot

130 in stock

$5.50
Select preferred diameter below.

Use 2 1/2 in. diameter air duct tubing for forced air systems. I.e.- to remote dispensing stations at various distances. Designed for 4-10 products, wrapped with tubular insulation, to run up inside column towers, shaft boxes etc.

Tubing, Air Duct 2″ ID, by the Foot

49 in stock

$15.99
Select preferred diameter below.

Use 2 in. diameter air duct tubing for forced air systems. i.e.- to remote dispensing stations at various distances. Designed for 2-6 products, wrapped with tubular insulation, to run up inside column towers, shaft boxes etc.

Tubing, Air Duct 3″ ID, by the Foot

97 in stock

$5.50
Select preferred diameter below.

Use 3 in. diameter air duct tubing for forced air systems. I.e.- to remote dispensing stations at various distances. Designed for 10-14 products, wrapped with tubular insulation, to run up inside column towers, shaft boxes etc.

Glycol Pump Foam Insulator

1 in stock

$10.99
The pump insulator is custom designed to fit ( # AA-31110 procon pump). 100 g.p.h. It will not fit smaller

Trunk Line 3/8″ ID Glycol Only 4 Lines, (2ea In/out) 20′

2 in stock

$269.99
Pre-wrapped glycol only trunkline. Ready to install, save labor time at the site. Ideal for running glycol lines from power