Showing 1–50 of 94 resultsSorted by price: low to high
Silicone High-Temp Tubing 1/4″ ID, by the Foot
117.5 in stock
$1.59
Select your preferred hose size & packaging length below
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow.
The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi.
1/4" ID | 7/16" OD | Sold by the foot.
Silicone Tubing | High-Temp | Various Sizes
129 in stock
$1.69
Select your preferred hose size & packaging length below
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow.
The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi.
3/16" ID | 3/8" OD | Sold by the foot.
Silicone High-Temp Tubing 3/8″ ID, by the Foot
288 in stock
$2.89
Select your preferred hose size & packaging length below
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow.
The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi.
3/8" ID | 5/8" OD | Will burst at 30 PSI at 70F. Sold by the foot.
Exelprene Tubing | High-Temp |Various Sizes
818 in stock
$3.39
Select your preferred hose size & packaging length below
A must have on the hot side of your brew system, especially when temps exceed 180 degrees Fahrenheit. Opaque high-temperature tubing. Less floppy than silicone tubing at hot temperatures.
3/8" ID x 5/8" OD - 1/8" wall thickness. Sold by the foot.
Max. Operating Temp. 275°F.
Silicone High-Temp Tubing 1/2″ ID, by the Foot
155.5 in stock
$3.59
Select your preferred hose size & packaging length below
Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow.
The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi.
1/2" ID | Will burst at 30 PSI at 70F. Sold by the foot.
Rubber Stopper | Solid & Drilled | Various Sizes
20 in stock
$3.99
Select your preferred size and style below.
#10 stopper - with 3/8 inch hole.
Top diameter 2 inches (51 mm), bottom diameter 1.66 inches (43 mm), length 1.10 inch (28 mm).
BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet.
Max. Temperature Rating: 158 °F (70 °C).
Universal Stopper | Solid & Drilled | Multiple Sizes
48 in stock
$3.99
Select your preferred size & style below.
Provides an air-tight seal to carboys and other fermentation vessels, necessary for proper fermentation.
The Medium Universal Stopper fits Fermonster and P.E.T style carboys. Similar for size 10-10.5 rubber stoppers. Drilled stopper has 8.5 mm (0.33 in.) hole to allow for attachment of airlock.
Carboy Cap | Glass & PET | Various Sizes
9 in stock
$4.99
Select your preferred size below.
2-spout carboy cap for 3, 5 & 6 gallon glass carboys. The two different size spouts allow you to connect a variety of fittings and use it in multiple ways. Insert a standard aitlock in the larger center opening. For an easy way to transfer liquids, insert a racking cane down the center tube, and blow or pump air into the smaller opening to start a siphon.
Carboy Cap (fits 6.5 gal. Glass Carboy)
20 in stock
$4.99
Select your preferred size below.
2-spout carboy cap for 6.5 gallon glass carboys. The two different size spouts allow you to connect a variety of fittings and use it in multiple ways. Insert a standard aitlock in the larger center opening. For an easy way to transfer liquids, insert a racking cane down the center tube, and blow or pump air into the smaller opening to start a siphon.
