Back Shank Assembly | For Coolers | Various Lengths

In stock

$27.99
Select preferred length and material below. Back shank assembly typically used for jockey boxes. Coil connects to one end and keg jumper hose connects to the other. Length: 3" Material: Chrome plated brass

Cap for 3″ Column Tower Chrome

In stock

$11.99
Chrome plated brass slip over cap designed for 3 in. dia. column towers. May not fit all manufacturer’s various brands.

Classic Tower Long Outside Shank Flange Chrome

In stock

$7.99
Outside chrome plated  brass flange designed to fit shank assemblies on Classic Tower. Long flange designates outside top position on

Column Tower Double Nitro/Stout Faucet Chrome KDI

In stock

$264.99
Double faucet tower from Krome dispense comes complete with nitro faucets. 5 feet of 3/16″ clear vinyl beer tubing for

Column Towers | Chrome & SS | American Beverage Co

In stock

$129.00

These column towers comes complete with faucets and each line includes 5ft. 3/16" clear beverage tubing, gasket, screws and hex nut assembly for connection to all standard keg couplers.

While chrome plated can work for beer, we do recommend stainless steel for it's longevity. However when dispensing wine, cider or kombucha stainless steel faucets, shanks and tail pieces are essential.

Column Tower Single Faucet Chrome KDI

In stock

$155.00
Column towers are the most basic draft beer dispensers, the ones we refer to as Classic. While they come without

Column Tower Triple Faucet Chrome KDI

In stock

$224.99
Column towers are the most basic draft beer dispensers, the ones we refer to as Classic. While they come without

Cone Ferrule Chrome

In stock

$2.49
CPB ferrule to be used between a cone washer and beer nut on jockey box cooler.

Coupling Nut (Smooth) Chrome

In stock

$2.49
Nut on shank to attach faucet with chrome finish smooth.

Coupling Nut Chrome

In stock

$4.69
Replacement coupling nut for standard towers.   

Coupling Sleeve Chrome

In stock

$1.25
From American beverage. Designed for manufacturer. Will very often fit other shanks . The coupling sleeve is secured to shank

Cover Flange Chrome Plated for Tower

In stock

$28.99
Cover flange/ beauty ring 4 in. dia chrome plated brass designed to fit Classic Tower #TC-03300. Replacement parts available while

Domed Cap for Tower, Chrome Plated

In stock

$39.99
4 in. dia chrome plated brass dome/ cap designed to fit Classic Tower #TC-03300. Available while supplies last.

Double Male Hex Nut Wing Connector Nickel-Plated

In stock

$22.99
Rather than cleaning your beer lines separately, use this duplex cleaning beer keg coupler to join two beer lines together, via

Elbow Beer Hex Thread 3/8″ Bore Chrome

In stock

$11.09
Use this 90 degree fitting on keg couplers where height clearance inside the keg cooler is limited or there is

Euro-style Beverage Faucet with Flow Control Chrome KDI

In stock

$157.20
Chrome plated exterior. European style with built-in adjustable flow control lever.  304 stainless steel spout. Retrofit to thread on to

Faucet Cleaning Adapter, Faucet Thread x 3/8″ Barb (Chrome)

In stock

$7.85
This 2-piece adapter fastens directly to the faucet coupling nut on the front of the shank. Includes 3/8″ tail piece

Four Spoke Chrome Plated Glass Rinser

In stock

$114.19
Replacement Rinsers for Rinser Drains 4.5″ Diameter – 4 Post (Rinser Only) Rinser arms are covered in clear PVC to

Hex Cap, Chrome Plated Brass

In stock

$12.99
Cap for male beer thread end of single flusher. Does not include washer.

Hex Nut (Beer Nut/Beer Thread) Chrome

In stock

$1.49
A hex nut, or beer nut, is used in conjunction with a tail piece barb for connections between hoses and

Hex Wing Nut Chrome

In stock

$2.59
A hex nut, or beer nut, is used in conjunction with a tail piece barb for connections between hoses and

Hose Splicer 1/2″ x 1/2″ Barbs Chrome

In stock

$2.50
1/2″ x 1/2″ inside diameter chrome plated brass. Use to connect 1/2″ to 1/2″ vinyl hose. Splicers are used to

Hose Splicer 1/4″ x 1/2″ Barbs Chrome

In stock

$1.95
1/4″ x 1/2″ inside diameter chrome plated brass. Use to connect 1/4″ to 1/2″ vinyl hose. Splicers are used to

Hose Splicer 1/4″ x 1/4″ Barbs Chrome

In stock

$1.95
1/4″ x 1/4″ inside diameter chrome plated brass. Use to connect 1/4″ to 1/4″ vinyl hose or 5/16″ poly line

Hose Splicer 1/4″ x 3/8″ Barbs Chrome

In stock

$1.95
1/4″ x 3/8″ inside diameter chrome plated brass. Use to connect 1/4″ to 3/8″ vinyl hose. Splicers are used to

Hose Splicer 1/4″ x 5/16″ Barbs Chrome

In stock

$2.29
1/4″ x 5/16″ inside diameter chrome plated brass. Use to connect 1/4″ to 5/16″ vinyl hose or 5/16″ poly line

Hose Splicer 3/16″ x 1/2″ Barbs Chrome

In stock

$1.95
3/16″ x 1/2″ inside diameter chrome plated brass. Use to connect 3/16″ to 1/2″ vinyl hose. Splicers are used to

Hose Splicer 3/16″ x 1/4″ Barbs Chrome

In stock

$1.95
3/16″ x 1/4″ inside diameter chrome plated brass. Use to connect 3/16″ to 1/4″ vinyl hose or 3/16″ vinyl to

Hose Splicer 3/16″ x 3/16″ Barbs Chrome

In stock

$1.95
3/16″ x 3/16″ inside diameter chrome plated brass. Use to connect 3/16″ to 3/16″ vinyl hose or 1/4″ poly line

Hose Splicer 3/16″ x 3/8″ Barbs Chrome

In stock

$2.45
3/16″ x 3/8″ inside diameter chrome plated brass. Use to connect 3/16″ to 3/8″ vinyl hose. Splicers are used to

Hose Splicer 3/16″ x 5/16″ Barbs Chrome

In stock

$1.95
3/16″ x 5/16″ inside diameter chrome plated brass. Use to connect 3/16″ to 5/16″ vinyl hose or 3/16″ vinyl to

Hose Splicer 3/8″ x 1/2″ Barbs Chrome

In stock

$2.50
3/8″ x 1/2″ inside diameter chrome plated brass. Use to connect 3/8″ to 1/2″ vinyl hose. Splicers are used to

Hose Splicer 3/8″ x 3/8″ Chrome

In stock

$1.19
3/8″ x 3/8″ OD chrome plated brass. Use to connect 3/8″ to 3/8″ vinyl hose. Splicers are used to join

Hose Splicer 3/8″ x 3/8″ Chrome (25)

Available on backorder

$26.99
3/8″ x 3/8″ OD chrome plated brass. Use to connect 3/8″ to 3/8″ vinyl hose. Splicers are used to join

Hose Splicer 3/8×3/8″ Chrome (50)

In stock

$48.99
3/8″ x 3/8″ OD chrome plated brass. Use to connect 3/8″ to 3/8″ vinyl hose. Splicers are used to join

Hose Splicer 5/16″ x 1/2″ Barbs Chrome

In stock

$2.95
5/16″ x 1/2″ inside diameter chrome plated brass. Use to connect 5/16″ to 1/2″ vinyl hose. Splicers are used to

Hose Splicer 5/16″ x 3/8″ Barbs Chrome

In stock

$1.95
5/16″ x 3/8″ inside diameter chrome plated brass. Use to connect 5/16″ to 3/8″ vinyl hose. Splicers are used to

Hose Splicer 5/16″ x 5/16″ Barbs Chrome

In stock

$1.95
5/16″ x 5/16″ inside diameter chrome plated brass. Use to connect 5/16″ to 5/16″ vinyl hose or 3/8″ poly line

Hose Splicer Tee 5/16″ Barbs Chrome

In stock

$4.95
An inline “T” fitting is useful to divide gas flow in more than one direction. This plated brass “T” fitting

Keeper Ring for Perlick Shank Chrome

In stock

$1.39
SUPPLIER DROPPED 2.4.25 � The keeper ring fits on the groove at the front end of the shank to hold

Keg Coupler [Sankey D] Chrome (Rotating Probe Series 36000D) Perlick

In stock

$67.39
SUPPLIER DROPPED 2.4.25 � Perlick’s US Sankey D system coupler features chrome plated brass body and rotating probe. Includes 5/16″

Keg Coupler [Sankey D] Chrome ABECO

Available on backorder

$43.99
ALTERNATIVE PRODUCT: Instead of this Chrome coupler, offer instead our P/N CB-08659. (ABECO PN 55SS-X). Full stainless steel at a